|
| |
|
|
|
Snubber, Width Guide, Roller Support |
Roller Threading Arrangement |
Coil Car |
|
* |
Uncoiler with manual / hydraulic jaw
expansion and variable drive & loop control system. |
* |
Straightening and feed rolls hardened and hard
chrome plated |
* |
Roll baskets along with threading table to
assist and support the threading of coil material |
* |
Hydraulic / pneumatic hold-down snubber and
piller for threading. (on request) |
* |
Coil Car (on request) |
* |
Coil width guide manual / automatic |
* |
Models uptill 700mm width and thickness uptill
8mm available on request |
* |
Feed Height adjustment |
* |
Coil tip flattener roller on request |
|
Hydraulic And Valve
Arrangement |
|
|
|
| |
| Specifications : |
| Model |
PRA 1065 |
PRA 1080 |
| Parameters |
|
|
| Width (mm) |
75-400 mm |
75-300 mm |
| Thickness (mm) |
0.7 - 3.0 mm |
1.0 - 6.0 mm |
| Coil I.D. |
508 mm |
508 mm |
| MAX. Coil O.D. |
1500 mm |
1500 mm |
| MAX Coli Weight |
5000 kg |
5000 kg |
| Feed Pitch Accuracy |
+ / - 0.15 mm |
+ /- 0.15 mm |
| MAX. Line speed MTR/MIN |
15 |
15 |
| Power Supply |
440 V / 50HZ |
440V / 50HZ |
| Air Supply |
5 KG / CM2 |
5 KG / CM2 |
|
| |
| Straightening Capacity / Width |
| Model |
Thickness |
Width |
| PRA 1065 |
07 - 2.0 mm |
400 mm |
| PRA 1065 |
0.7 - 3.0 mm |
250 mm |
| PRA 1080 |
1.0 - 4.0 mm |
300 mm |
| |
1.0 - 6.0 mm |
200 mm |
|
| |
 |
Control Panel With Touch Screen Programming For Simplicity In Parameters Feeding |
The above parameters are for the material having tensile strength 40kgf / mm2 max.
Model of higher capacity or higher or lower line speed are available on request. |
| Technical specifications are subject to chance to suit end application. |
